Panasonic WV-SW355

110
110 111
Configure the settings relating to the schedules
[Schedule]
Onthe"Schedule"page,itispossibletoconfigurethesettingsrelatingtoschedulesasfollows.
 • Alarmpermission(Alarminputwillbereceivedonlyinthespecifiedschedule.)
 • VMDpermission(Videomotiondetectionwillbeactiveonlyinthespecifiedschedule.)
 • Accesspermission(Accesstothecamerawillbeallowedonlyinthespecifiedschedule.)
 • H.264recording(SDrecordingwillbeperformedonlyinthespecifiedschedule.)
The "Schedule" page has only the [Schedule] tab.
Up to 5 schedules can be set.
Step 1
Select an action to be assigned to the schedule from
"Schedule mode".
"Off"isselectedatthedefault.
Off: No action will be taken for the respective schedule.
Alarm permission: Alarm input (terminal alarm) will be
received during the period of the schedule.
VMD permission: The video motion detection (VMD)
function will be active during the period of the
schedule.
Access permission: Users whose access level is set to
2 and 3 on the "User auth." tab (☞ page 77) can
access the camera only in the period of schedule.
H.264 recording: The SD recording will be performed
at the designated time in the schedule.
Note:
 • Select"On"for"Userauth."onthe[Userauth.]tab
of "User mng." page (☞page77)and"Off"for
"Host auth." on the "Host auth." page (☞ page 78)
to validate "Access permission".
 • Whenselecting"H.264recording",select"H.264"
for "Recording format" on the [SD memory card] tab
and select "Schedule" for "Save trigger". (☞ Page
32)
Step 2
Select days of a week by checking the respective
checkboxes.
Step 3
Click [C] to select the start time and the end time of the
schedule.
When not designating time, check the checkbox of
"24h".
Step 4
Click the [Set] button after completing the settings.
→ The result will be displayed at the bottom of the
window.
Note:
 • Theschedulesdisplayedatthebottomofthewin-
dow can be identified by colors assigned to each
schedule.