Panasonic WV-SW355

28
28 29
Configure the basic settings of the camera [Basic]
The basic settings such as camera title, time and date, SD memory card and the logs can be configured on the
"Basic" page.
The "Basic" page has 3 tabs; the [Basic] tab, the [SD memory card] tab and the [Log] tab.
Configure the basic settings [Basic]
Click the [Basic] tab on the "Basic" page. (☞Pages24and25:Howtodisplay/operatethesetupmenu)
The settings such as the camera title, time and date, etc. can be configured on this page.
[Camera title]
Enter the title of the camera. Click the [Set] button after
entering the title of the camera. The entered title will be
displayed in the "Camera title" field.
Available number of characters: 0 - 20 characters
Unavailable characters: " &
Default: Varies as follows depending on the model in
use.
WV-SW355
WV-SW352
[Date/time]
Enter the current time and date. When "12h" is selected
for "Time display format", "AM" or "PM" can be
selected.
Available range:01/01/201000:00:00-31/12/2035
23:59:59
Important:
 • UseanNTPserverwhenthemoreaccuratetime&
date setting is required for the system operation.
(☞ Page 82)
[Time display format]
Select the time display format from "24h", "12h" and
"Off".Enterthecurrenthourreflectingthissettingwhen
entering the current time and date for "Date/time". To
hidetimeanddate,select"Off".
Default: 24h
[Date/time display format]
Select a date/time display format. When "2010/04/01
13:10:00"issetfor"Date/time"afterselecting"24h"for
"Date/time display format", time & date will be respec-
tively displayed as follows.
DD/MM/YYYY:01/04/201013:10:00
MM/DD/YYYY:04/01/201013:10:00
DD/Mmm/YYYY:01/Apr/201013:10:00
YYYY/MM/DD:2010/04/0113:10:00
Mmm/DD/YYYY: Apr/01/201013:10:00
Default: DD/MM/YYYY (PAL model)
Mmm/DD/YYYY (NTSC model)
[Summer time (daylight saving)]
Select"In","Out"or"Auto"todeterminewhetherornot
to apply daylight saving time. Configure this setting if
the summer time (daylight saving time) is applied in the
location where the camera is in use.
In: Applies summer time. An asterisk (*) will be dis-
played on the left side of the displayed time and
date.
Out: Does not apply summer time.
Auto: Applies summer time in accordance with the set-
tings for "Start time & date" and "End time & date"
(month, week, day of the week, time).
Default:Out
[NTP/Time zone]
When "NTP" is clicked, the [NTP] tab of the "Server"
page will be displayed. (☞ Page 82)
[Start time & date][End time & date]
When "Auto" is selected for "Summer time(daylight
saving)", select the time & date for the start time and
the date time (month, week, day of the week, time).