26 27
!0 [Network] button
Displays the "Network" page. The network settings
and the settings relating to DDNS (Dynamic DNS),
SNMP (Simple Network Management Protocol) and
the FTP (File Transfer Protocol) periodic transmis-
sion can be configured on the "Network" page.
(☞ Page 83)
!1 [Schedule] button
Displaysthe"Schedule"page.Onthe"Schedule"
page, it is possible to designate time zones to allow
to receive alarm input or to allow to activate the
VMD detection function. (☞ Page 110)
!2 [Maintenance] button
Displays the "Maintenance" page. System log
check, firmware upgrade, status check and initial-
ization of the setup menu can be carried out on the
"Maintenance" page. (☞ Page 111)
!3 [Help] button
Displays the "Help" page. (☞ Page 116)
!4 Camera title
The title of the camera whose settings are currently
being configured will be displayed.
!5 Setup page
Pages of each setup menu will be displayed. There
are tabs for some setup menus. When the under-
lined item is clicked, the corresponding help page
will be displayed.
To Next Page
Loading...
