Panasonic WV-SW355

28
28 29
[Camera title on screen]
Select"On"or"Off"todeterminewhetherornottodis-
play the camera title on the screen.
When"On"isselected,thecharacterstringenteredfor
"Camera title on screen (0-9, A-Z)" will be displayed at
thepositionselectedfor"OSDposition".
Default:Off
[Camera title on screen (0-9, A-Z)]
Enter a character string to be displayed on the image.
Available number of characters: 0 - 20 characters
Available characters: 0-9, A-Z and the following
marks.
!"#$%&'()*+,-./:;=?
Default: None (blank)
[OSD position]
Select the position where the time and date and a char-
acter string to be displayed on the image of the "Live"
page.
Upper left: The above information will be displayed at
the upper left corner of the main area on the "Live"
page.
Lower left: The above information will be displayed at
the lower left corner of the main area on the "Live"
page.
Upper right: The above information will be displayed at
the upper right corner of the main area on the "Live"
page.
Lower right: The above information will be displayed at
the lower right corner of the main area on the "Live"
page.
Default: Upper left
[Brightness status display]
Select"On"or"Off"todeterminewhetherornottodis-
play the status of brightness on images displayed on
the "Live" page when adjusting brightness.
Default:On
[Indicator]
Determine whether or not to use the following indica-
tors.Select"On"tousethefollowingindicatorsto
check the operational status by lighting them. Select
"Off"toturnofftheindicatorsatalltimes.
 • Linkindicator
 • Accessindicator
 • SDmemorycarderrorindicator/Autofocusindica-
tor
Default: On
Note:
 • Linkindicator(orange):Thisindicatorwilllightwhen
communication with the connected device is avail-
able.
 • Accessindicator(green):Thisindicatorwilllight
when accessing a network.
 • SDmemorycarderrorindicator/Autofocusindica-
tor(red):LightswhenanerroroccurredintheSD
memory card. This LED will blink in the process of
the auto focus function and blinking will stop when
the focus adjustment is complete.
[Alarm status update mode]
Select an interval of the camera status notification from
the following.
When the status of the camera changes, the alarm
occurrence indication button, the [AUX] button or the
SD saving status indicator will be displayed to notify of
the camera status.
Polling(30s): Updates the status each 30 seconds and
provide notification of the camera status.
Real time: Provide notification of the camera status
when the status has changed.
Default: Real time
Note:
 • Dependingonthenetworkenvironment,notification
may not be provided in real time.
[Alarm status reception port]
When selecting "Real time" for "Alarm status update
mode", designate a port number to which the status
change notification is to be sent.
Available port number: 1 - 65535
Unavailable port number: refer to the help window.
Default: 31004