Panasonic WV-SW355

112
112 113
Important:
 • Aftercompletingtheupgrade,deletetemporary
internet files. (☞ Page 124)
 • UpgradethefirmwareusingaPCinthesamesub-
net as the unit.
 • Followtheinstructionsfromthedealerwhen
upgrading the firmware.
 • Applicationsoftwareupgrade
  Usethedesignatedfile(extension:img)forthefirm-
ware upgrade.
The name of the firmware to be used for the
upgrade should be "model name (Use small letters.
"WV" is not required.)_xxxxx.img".
* ("xxxxx" indicates the version of the firmware.)
 • Donotturnoffthepowerofthecameraduringthe
upgrade process.
 • Donotperformanyoperationduringupgradingand
wait until it completes.
 • Thefollowingnetworksettingswillnotbereset
when upgrading the firmware after selecting "Reset
the settings to the default after completing the
upgrade. (Except the network settings)".
  On/OffforDHCP,IPaddress,subnetmask,default
gateway, HTTP port, HTTPS port, connection proto-
col (HTTP/HTTPS), CRT key, server certificate,
UPnP setting, line speed, bandwidth control (bit
rate), time & date
 • TheviewersoftwareusedoneachPCshouldbe
licensed individually. Refer to your dealer for the
software licensing.