Panasonic WV-SW355

86
86 87
■ HTTPS
It is possible to enhance the network security by
encrypting the access to cameras using the HTTPS
function.
Refer to page 89 for how to configure the HTTPS set-
tings.
[CRT key generate]
CRT key (SSL encryption key) used for the HTTPS pro-
tocol is generated.
To generate the CRT key, click the [Execute] button to
display "CRT key generate" dialog box.
[Self-signed Certificate - Generate]
The camera itself generates the security certificate used
for the HTTPS protocol. (Self-signed certificate)
To generate the self-signed certificate, click the
[Execute] button to display the "Self-signed Certificate -
Generate" dialog box.
[Self-signed Certificate - Information]
Displays the information of the self-signed certificate.
When the [Confirm] button is clicked, the registered
information of the self-signed certificate will be dis-
played in the "Self-signed Certificate - Confirm" dialog
box.
When the [Delete] button is clicked, the generated self-
signed certificate will be deleted.
[CA Certificate - Generate Certificate Signing
Request]
When using the security certificate issued by CA
(Certificate Authority) as the security certificate used for
the HTTPS protocol, the CSR (Certificate Signing
Request) will be generated.
To generate the CSR, click the [Execute] button to dis-
play the "CA Certificate - Generate Certificate Signing
Request" dialog window.
[CA Certificate - CA Certificate install]
Installs the server certificate (security certificate) issued
by CA (Certificate Authority) and displays the informa-
tion of the installed server certificate.
To install the server certificate, click the [Browse...] but-
tontodisplaytheOpendialogbox,andselectthefile
of the server certificate issued by CA, and click the
[Execute] button.
If the server certificate is already installed, the file name
of the installed server certificate will be displayed.
[CA Certificate - Information]
Displays the information of the server certificate.
When the [Confirm] button is clicked, the registered
information of the installed server certificate will be dis-
played in the "CA Certificate - Confirm" dialog box. If
the server certificate is not installed, the content of the
generated CSR file will be displayed.
When the [Delete] button is clicked, the installed server
certificate will be deleted.
Important:
 • Beforedeletingthevalidservercertificate(security
certificate), confirm that there is a backup file on the
PC or another media. The backup file will be
required when installing the server certificate again.
[Connection]
Select the protocol used to connect the camera.
HTTP:OnlytheHTTPconnectionisavailable.
HTTPS:OnlytheHTTPSconnectionisavailable.
Default: HTTP
[HTTPS port]
Designate the HTTPS port number to be used.
Available port number: 1 - 65535
Default: 443
Note:
 • The camera will restart after the connection setting
is changed.
 • Notationwhenusingtheself-signedcertificate:
If the camera is accessed using the HTTPS protocol
for the first time, the warning window will be dis-
played. In this case, follow the instructions of the
wizard to install the self-signed (security) certificate.
(☞ Page 96)
 • Notationwhenusingtheservercertificate:
In advance, install the root certificate and intermedi-
ate certificate on the browser in use. Follow the
instructions of CA for how to obtain and install these
certificates.
 • WhenthecameraisaccessedusingtheHTTPSpro-
tocol, the refresh interval and frame rate of images
may be lower.
 • WhenthecameraisaccessedusingtheHTTPSpro-
tocol, it may take time to display images.
 • WhenthecameraisaccessedusingtheHTTPSpro-
tocol, the images may be distorted or audio may be
interrupted.