Parameter Specification Table 10-11
590 Series DC Digital Converter
Tag (MMI) Name Function Block Minimum Value Maximum Value Notes
429 Modulus Of Reel Speed Unallocated 0 10500 RO
430 Unfiltered Diameter Unallocated 0 10000 RO
431 Diameter Unallocated 0 499 RW
432 TORQUE DEMAND TORQUE CALC. -20000 20000 RW
433 TENSION ENABLE TORQUE CALC. 0 1 RW
434 OVER WIND TORQUE CALC. 0 1 RW
435 POS. I CLAMP TORQUE CALC. 0 499 RW
436 NEG. I CLAMP TORQUE CALC. 0 499 RW
437 REEL SPEED DIAMETER CALC. -10500 10500 RW
438 TAPER TAPER CALC. -10000 10000 RW
439 TENSION SPT. TAPER CALC. 0 10000 RW
440 TENSION TRIM TAPER CALC. -10000 10000 RW
441 TOT.TENS.DEMAND TAPER CALC. -10000 10000 RO
442 Taper Unallocated 0 499 RW
443 INPUT 1 SETPOINT SUM 2 -30000 30000 RW
444 INPUT 0 SETPOINT SUM 2 -30000 30000 RW
445 INPUT 2 SETPOINT SUM 2 -30000 30000 RW
446 RATIO 1 SETPOINT SUM 2 -30000 30000 RW
447 RATIO 0 SETPOINT SUM 2 -30000 30000 RW
448 DIVIDER 0 SETPOINT SUM 2 -30000 30000 RW
449 LIMIT SETPOINT SUM 2 0 20000 RW
450 Setpoint Sum 2 Unallocated 0 499 RW
451 SPT. SUM OUTPUT SETPOINT SUM 2 -20000 20000 RO
452 TAPERED DEMAND TAPER CALC. 0 10000 RO
453 RAMP RATE DIAMETER CALC. 1 6000 RW
454 SOURCE TAG LINK 5 0 499 RW
455 DESTINATION TAG LINK 5 0 499 RW
456 SOURCE TAG LINK 6 0 499 RW
457 DESTINATION TAG LINK 6 0 499 RW
458 SOURCE TAG LINK 7 0 499 RW
459 DESTINATION TAG LINK 7 0 499 RW
460 SOURCE TAG LINK 8 0 499 RW
461 DESTINATION TAG LINK 8 0 499 RW
462 RESET VALUE DIAMETER CALC. 0 10000 RW
463 EXTERNAL RESET DIAMETER CALC. 0 1 RW
464 OFFSET ANOUT 1 (A7) -10000 10000 RW
465 OFFSET ANOUT 2 (A8) -10000 10000 RW
466 DIVIDER 1 SETPOINT SUM 2 -30000 30000 RW
467 SOURCE TAG LINK 9 0 499 RW
468 DESTINATION TAG LINK 9 0 499 RW
469 SOURCE TAG LINK 10 0 499 RW
470 DESTINATION TAG LINK 10 0 499 RW
471 STANDBY FIELD RESERVED 0 10000 RW
472 Speed Feedback State (Warning) Unallocated 0 1 RO
473 MODE PID 0 4 RW
474 MIN PROFILE GAIN PID 0 10000 RW
475 PROFILED GAIN PID 0 1000 RO
476 3-PHASE FIELD RESERVED 0 1 RW
To Next Page
Loading...
