The Man-Machine Interface (MMI) 5-5
590 Series DC Digital Converter
Changing a Parameter Value
Refer to “The Menu System Map” above to see how
the menu is mapped.
Each menu contains parameters.
With the Parameter you want on view, press M to
begin editing.
The up (↑) and down (↓) keys will now change the
parameter/function value.
Press E to finish editing.
The four keys will once again navigate around the Menus. Refer back to “
Navigating the
Menu System”, page 5-
3.
Alarm Message Displays
An alarm message will be displayed on the MMI when the unit is tripped.
• The Converter has tripped.
The top line indicates a trip has occurred while
the bottom line gives the reason for the trip.
See example opposite.
Acknowledge the trip message by pressing the E key.
Refer to Chapter 7: “Trips and Fault Finding” for trip messages and reasons.
Quick Diagnostics
Hold down the M key to enter the DIAGNOSTICS menu in the first entry, SPEED DEMAND.
Special Key Combinations
A special key combination restores ALL default parameters to the Converter.
• Hold down the four MMI keys (↑, ↓, E, M), then power-up the Converter.
Special Menu Features
Menu Viewing Levels
For ease of operation there are two `viewing levels` for the MMI: full view or reduced view.
The setting for the viewing level decides how much of the menu system will be displayed.
Refer to “
The Menu System Map”, page 5-4 to see how the viewing level changes the displayed
menu.
To change the viewing level, go to the MENUS menu. The first parameter in this menu, FULL
MENUS selects the viewing level.
• Select DISABLED to use the reduced menu system.
• Select ENABLED to use the full menu system.
Selecting the Display Language
There is an option to select a different display language.
The choice of display language is selected by the LANGUAGE parameter in MENUS menu.
Remember to perform a PARAMETER SAVE if you need the new language to be saved on
power-down.
The available languages are: ENGLISH and FRENCH. However, other languages are available
by contacting Parker SSD Drives.
increment
decrement
menu
change
exit
menu
change
EDITING PARAMETERS
E
M
1
1
HEATSINK TRIP
* * * ALARM * * *
To Next Page
Loading...
