IMPORTANT USER INFORMATION
4 IPA Hardware Installation Guide
Product Type: IPA Drive Controllers, including IPA04-HC and IPA15-HC
The above product complies with the requirements of directives:
EMC Directive 2004/108/EC
Low Voltage Directive 2006/95/EC
CE Marking Directive 93/68/EEC
This product has been shown to meet the requirements of both UL61800-5-1UL508C as a Recognized
Component, and the European Union CE requirements for Marking (93/68/EEC), Safety (IEC 61010-1 ed3.0 per
2006/95/EC Low Voltage Directive) and Electromagnetic Compatibility (IEC 61800-3 ed2.0 per 204/108/EC) when
installed, operated and maintained as described in the product User Guide.
Per IEC 61800-3 ed2.1 section 3.2.5, the IPA is considered a PDS (Power Drive System) of rated voltage less than
1000V, intended for use in the second environment (industrial) and not intended for direct use in the first
environment (residential). This means only those individuals familiar with the EMC requirements of power drive
systems should install this product and that this product is designed for connection to mains distribution networks
other than low-voltage networks, which may supply domestic premises. The drives can tolerate atmospheric
pollution degree 2, which means only dry, non-conductive pollution is acceptable.
To Next Page
Loading...
Need help?
General
