PCME STACK 990 - Sensor Options

- PCME STACK 990 MANUAL: 9 -
Cable type 4 core screen (see installation section for details)
Air Purge requirements
May be required on some applications (consult PCME).
Requires optional air purge fitting and an external supply of
5-10 litres/min of dry clean, oil free instrument air
Sensor Options
Sensor Type options
Standard sensor
Insulated sensor
Passive/active sensor
Standard sensor
Passive/active sensor
Standard sensor
Passive/active sensor
Standard sensor
0-250°C
0-250°C
0-250°C
0-400°C
0-400°C
0-800°C
0-800°C
0-400°C 0-10bar
Rod Length options 100-1000mm *
ATEX/ IECEx Category options
None (standard)
ATEX: Category 3 dust (zone 22) **
ATEX: Category 1 dust (zone 20) ***
IECEx: Category 1 dust (zone 20) ***
*limited to 800mm on 400°C, 800°C and passive/active versions
**standard 250°C and passive/active 250°C only
***standard 250°C only. Isolating spur provided with sensor.