PCME STACK 990 User Manual

- PCME STACK 990 MANUAL: 51 -
6.11 Log Rates
The Log Rates option allows the storage rate for the long-term memory and the short-term
memory to be viewed or changed.
Select ‘Setup’ display
Menu route:
Log rates
The following screen is displayed:
Select Long Term or Short Term as required.
The Long Term memory may be set to log at any of the following intervals:
1, 2, 5, 10, 15, 30, 60, 120, 240 minutes.
The short-term memory may be set to log at any of the following intervals:
10, 15, 20, 30, 60, 120, 240 seconds.
6.12 More Sensor Settings
The More Settings menu enables advanced changes to be made to sensor settings or manually
add or delete sensors.
Select ‘Setup’ display
Menu route:
More Settings
The following screen is displayed:
15Long T erm (m ins)
Short Term (secs)
Back
60
Add a new device
Sensor Settings
Edit an existing device
Delete an existing device
Edit All Devices
Back

PCME STACK 990 Specifications

General

Brand	PCME
Model	STACK 990
Category	Measuring Instruments
Language	English