SGM700 Digitizer
Firmware update -continue-
Now set the SGM in boot mode:
Go into the configuration menu by pressing key 3 >2 sec.
The following screen will appear:
Go to- - - SoF by pressing key 1 <2 sec untll you see - - - SoF
Press key 2 <2 sec to enter Boot mode.
The following screen is visible:
Press key 3 >2 sec to set the SGM700 in Boot mode.
Now click Firmware Update to start the update.
The SGM will reboot automatically and the Firmware Up-
date Manager wil show Updated.
96
To Next Page
Loading...
