SGM700 Digitizer
Configuration Menu -gCL- -continue-
Use key 1 and key 2 to enter the location elevation of the loadcell(s). Key 1 is
used for changing the number (1-9), key 2 is used for changing the position of the
cursor. And press key 3 >2 sec.to set the location latitude. Choose value
between –1000 and 30000 meter.
Up Down Left Right Confirm
The following screen is visible:
Configura- tion Menu –CLo-
6.18 - - - CLo Date and time configuration (SGM750 only)
In Clock, you can set the internal date and time.
Press key 2 <2 sec to enter Clock.
The following screen is visible:
Set the date. Use key 1 and key 2 to change the
number Key 1 is for changing the number (1-9), key 2 is for changing the position
of the cursor. Confirm by pressing key 3 >2 sec. Format DD.MM.YY
Up Down
Left Right
Confirm
92
To Next Page
Loading...
