99
2
Taking Pictures
You can set the format of image files.
Sets the recording size of images when [File Format] is set to [JPEG].
The selectable sizes vary according to the [Aspect Ratio] setting.
File Format
JPEG
Captures images in JPEG format. (Default setting)
You can change the number of recorded pixels in [JPEG Recorded
Pixels], and the image quality level in [JPEG Quality].
RAW
The RAW format is a CMOS sensor output format saved without
processing. RAW files are recorded with the general-purpose DNG
(Digital Negative) format designed by Adobe Systems.
Effects of White Balance and Custom Image are not applied to the
captured images, but they are saved as actual original information.
When you perform the development process by using the RAW
Development function (p.158), or using the provided software
“SILKYPIX Developer Studio 3.0 LE” (p.198), you can create JPEG
images with these effects.
RAW+ Captures images in both RAW and JPEG formats.
When the capture mode is set to p, the image is saved in JPEG
format, regardless of the [File Format] setting.
JPEG Recorded Pixels
Aspect Ratio Recorded Pixels Pixels
D
E 4000×3000 (default setting)
a 3072×2304
f 2592×1944
h 2048×1536
E
k 3968×2232 (default setting)
f 3072×1728
h 2560×1440
i 2048×1152
To Next Page
Loading...
Need help?
General
