Pentax MX-1 User Manual

158
4
Editing and Printing Images
2 Press the 3 button.
The screen returns to the previous screen.
3 Press the 4 button.
Proceed to Step 11 on p.155.
You can convert captured RAW images into JPEG images, and save
them as a new file.
1 Select a RAW image in playback mode, and press the
four-way controller (3).
The Playback Mode Palette appears.
2 Use the four-way controller (2345) to select
h (RAW Development), and press the 4 button.
The screen to select a development method is displayed.
3 Use the four-way controller (23)
to select [Develop single image],
and press the 4 button.
The parameters recorded in the image file
appear.
Proceed to Step 6 if you do not need to
change the parameters.
Developing | Images
Only RAW images captured with this camera can be edited. RAW
images and JPEG images captured with other cameras cannot be edited
on this camera.
To Develop One RAW Image
OK
OK
Develop single image
Develop single image
Develop multiple images
Develop multiple images
Cancel
Cancel

Pentax MX-1 Specifications

General

Aperture	f/1.8-2.5
ISO Range	100 - 12800
Image Stabilization	Sensor-shift Shake Reduction
Storage Media	SD/SDHC/SDXC memory card
Weight	391 g (including battery and memory card)
Effective Pixels	12.0 MP
Lens	28-112mm (4x Optical Zoom)
Shutter Speed	1/2000 to 30 sec
LCD Screen	3.0-inch tilting LCD, 920, 000 dots
Video Resolution	1920x1080 (Full HD)
Battery Type	Rechargeable D-LI106 lithium-ion battery