Pentax MX-1 User Manual

189
5
Settings
1 Select [6. Save Menu Location] in the [A Custom 1]
menu, and press the four-way controller (5).
The [6. Save Menu Location] screen appears.
2 Use the four-way controller (23) to select [Reset Menu
Location] or [Save Menu Location], and press the 4
button.
3 Press the 3 button.
The screen that was displayed before selecting the menu appears
again.
You can choose the start-up screen displayed when the camera is
turned on.
You can choose any of the following images as the start-up screen:
- The pre-installed screen
- The Guide Display Start-up Screen showing a guide for the shooting
modes and buttons
- One of the captured images (compatible images only)
1 Use the four-way controller (2345) to select x
(Start-up Screen) from the Playback Mode Palette.
2 Press the 4 button.
The image selection screen appears.
1
Reset Menu
Location
The [A Rec. Mode 1] menu ([C Movie 1] menu in C
mode or [R Setting 1] menu in playback mode) is always
displayed first. (Default setting)
2
Save Menu
Location
The menu tab last selected is displayed first.
Changing the Start-up Screen

Pentax MX-1 Specifications

General

Aperture	f/1.8-2.5
ISO Range	100 - 12800
Image Stabilization	Sensor-shift Shake Reduction
Storage Media	SD/SDHC/SDXC memory card
Weight	391 g (including battery and memory card)
Effective Pixels	12.0 MP
Lens	28-112mm (4x Optical Zoom)
Shutter Speed	1/2000 to 30 sec
LCD Screen	3.0-inch tilting LCD, 920, 000 dots
Video Resolution	1920x1080 (Full HD)
Battery Type	Rechargeable D-LI106 lithium-ion battery