109
2
Taking Pictures
1
Use the four-way controller (23) to select [Blink
Detection] in the [A Rec. Mode 2] menu.
2
Use the four-way controller (45) to select O or P.
O Blink Detection function works (default setting).
P Blink Detection function does not work.
You can set the Instant Review displayed immediately after images are
shot.
1
Use the four-way controller (23) to select [Instant
Review] in the [A Rec. Mode 3] menu, and press the
four-way controller (5).
2
Press the four-way controller (5),
use the four-way controller (23)
to select a display time, and press
the 4 button
3
Use the four-way controller (23)
to select [Zoom Instant Review], [Histogram] or
[Highlight Alert], and use the four-way controller (45)
to switch between O (On) and P (Off).
• If the Blink Detection function worked when shooting, the message
[Closed eyes have been detected] appears for 3 seconds during
Instant Review.
• The Blink Detection function cannot be set in p, X (Digital Wide),
F (Digital Panorama), c (Time-Lapse Movie), C (Movie) or d
(High Speed Movie) mode.
Blink Detection 1p.57
Setting the Instant Review
Zoom Instant
Review
You can enlarge the image with the e-dial (p.131).
Cancel
Instant Review
Display Time
1 sec.
3 sec.
Hold
Off
Zoom Instant Review
Histogram
Highlight Alert
OK
To Next Page
Loading...
Need help?
General
