Pentax MX-1 User Manual

33
This section explains how to use the following menus: [A Rec. Mode],
[C Movie], [R Setting] and [A Custom].
Below, how to set [Shake Reduction] in the [A Rec. Mode 2] menu is
explained as an example.
1 Press the 3 button in capture
mode.
The [A Rec. Mode 1] menu appears on the
display.
The menus listed below are displayed in the
following situations.
2 Press the four-way controller (5).
Each time the four-way controller (5) is
pressed, the menu will change in the
following sequence: [A Rec. Mode 2], [A
Rec. Mode 3], [C Movie 1] ... [A Rec.
Mode 1].
You can also change the menu by turning
the e-dial.
When you turn the zoom lever, the tab changes in the sequence of [A
Rec. Mode], [C Movie], [R Setting], and [A Custom].
3 Use the four-way controller (23)
to select an item.
Using the Menus
When the mode dial
is set to C
[C Movie 1] menu
When the mode dial
is set to 9 (Green
Mode)
[R Setting 1] menu
In playback mode [R Setting 1] menu
1 23
AWB
AWB
MENU
Exit
Exit
Custom Image
Custom Image
Capture Settings
Capture Settings
White Balance
White Balance
AF Setting
AF Setting
AE Metering
AE Metering
ND Filter
ND Filter
Auto
Auto
1 2 3
MENU
Exit
Exit
Sensor Shift
Sensor Shift
On
On
D-Range Setting
D-Range Setting
Distortion Corr.
Distortion Corr.
Shake Reduction
Shake Reduction
Face Detection
Face Detection
Blink Detection
Blink Detection
HDR Capture
HDR Capture
Standard
Standard

Pentax MX-1 Specifications

General

Aperture	f/1.8-2.5
ISO Range	100 - 12800
Image Stabilization	Sensor-shift Shake Reduction
Storage Media	SD/SDHC/SDXC memory card
Weight	391 g (including battery and memory card)
Effective Pixels	12.0 MP
Lens	28-112mm (4x Optical Zoom)
Shutter Speed	1/2000 to 30 sec
LCD Screen	3.0-inch tilting LCD, 920, 000 dots
Video Resolution	1920x1080 (Full HD)
Battery Type	Rechargeable D-LI106 lithium-ion battery