Pentax MX-1 User Manual

117
2
Taking Pictures
1 Press the Movie button in still-picture capture mode.
Recording starts.
2 Press the Movie button.
Recording stops.
Change the movie settings in the [C Movie] menu.
1 Press the 3 button in movie mode.
The [C Movie 1] menu appears.
2 Use the four-way controller (23)
to select an item and change its
setting.
3 Press the 3 button after changing the setting.
The setting is saved and the camera returns to capture status.
• When recording starts using the Movie button, the number of recorded
pixels is fixed to 1920×1080 and the frame rate 30 fps.
• [Movie SR] (Movie Shake Reduction) is fixed to O (On).
• The recorded area of a movie becomes smaller, both horizontally and
vertically, than the image shown on the display before recording.
Changing the Movie Settings
Movie button
1
MENU
Full
HD
Exit
Exit
Custom Image
Custom Image
Recorded Pixels
Recorded Pixels
Movie SR
Movie SR
Wind Suppression
Wind Suppression
Enable Autofocus
Enable Autofocus
Enable Optical Zoom
Enable Optical Zoom

Pentax MX-1 Specifications

General

Aperture	f/1.8-2.5
ISO Range	100 - 12800
Image Stabilization	Sensor-shift Shake Reduction
Storage Media	SD/SDHC/SDXC memory card
Weight	391 g (including battery and memory card)
Effective Pixels	12.0 MP
Lens	28-112mm (4x Optical Zoom)
Shutter Speed	1/2000 to 30 sec
LCD Screen	3.0-inch tilting LCD, 920, 000 dots
Video Resolution	1920x1080 (Full HD)
Battery Type	Rechargeable D-LI106 lithium-ion battery