131
3
Playing Back and Deleting Images
1
Press the Q button after taking a picture.
The image appears on the display.
2
Use the four-way controller (2345) to select s
(Image Rotation) from the Playback Mode Palette.
3
Press the 4 button.
The rotation selection screen (0°, Right 90°, Left 90°, or 180°) appears.
4
Use the four-way controller
(2345) to choose the rotation
direction, and press the 4 button.
The information of image rotation is saved
and displayed on single-image display.
You can magnify an image up to ten times.
1
In playback mode, use the four-way controller (45) to
choose the image you want to magnify.
2
Turn the e-dial to the right (y) or turn the zoom lever to
the right (5).
The image is magnified (×1.1 to ×10).
Continuing to turn the e-dial to the right (y) changes the magnification
continuously.
Rotating the Image
• Images taken at F (Digital Panorama) mode and movies cannot be
rotated.
• Protected images can be rotated, but they cannot be saved in a rotated
state.
• By setting [9. Save Rotation Info] (p.67) in the [A Custom 2] menu to
[On], information of the image rotation in shooting can be saved. When
you set [10. Auto Image Rotation] (p.67) to [On], images automatically
rotate in playback.
Zoom Playback
Cancel
OK
To Next Page
Loading...
Need help?
General
