Pentax MX-1 User Manual

168
4
Editing and Printing Images
DPOF settings are applied to all the images stored in the camera.
1 Select [All Images] in Step 3 on p.167.
2 Press the 4 button.
The message [Applies DPOF settings to all images] appears.
3 Choose the number of copies and
switch between O and P for [Date].
Refer to Steps 6 and 7 in “Printing a Single
Image” (p.167) for details on how to make the
settings.
4 Press the 4 button.
The settings specified for all the images are saved and the DPOF
setting method selection screen is resumed.
Printing All Images
• The number of copies specified in the [All Images] setting applies to all
the images. Before printing, check that the number is correct.
• DPOF settings specified for single images are canceled when settings
are made with [All Images].
OK
OK
Cancel
Cancel
Date
Date
Copies
Copies
Date
Date
Applies DPOF settings
to all images
Applies DPOF settings
to all images

Pentax MX-1 Specifications

General

Aperture	f/1.8-2.5
ISO Range	100 - 12800
Image Stabilization	Sensor-shift Shake Reduction
Storage Media	SD/SDHC/SDXC memory card
Weight	391 g (including battery and memory card)
Effective Pixels	12.0 MP
Lens	28-112mm (4x Optical Zoom)
Shutter Speed	1/2000 to 30 sec
LCD Screen	3.0-inch tilting LCD, 920, 000 dots
Video Resolution	1920x1080 (Full HD)
Battery Type	Rechargeable D-LI106 lithium-ion battery