35
While shooting, the current settings can be checked on the display, and
you can switch to the control panel and change settings.
Below, how to set [Focusing Area] is explained as an example.
1
Press the M button in capture
mode.
The control panel appears.
2
Use the four-way controller
(2345) to select an item you
want to change the setting for.
You cannot select items that cannot be
changed as a result of current camera
settings.
3
Press the 4 button.
The setup screen of the selected item
appears.
• You can select whether to display the menu tab selected the last time
first, or to always display the [A Rec. Mode 1] menu first. (p.188)
• Refer to the following pages for details on each menu.
-[A Rec. Mode] menus 1 p.63
-[C Movie] menu 1p.66
-[R Setting] menus 1p.169
-[A Custom] menus 1p.67
Using the Control Panel
Custom Image
Bright
Focusing Area
Auto
To Next Page
Loading...
