104
2
Taking Pictures
4
Press the 4 button.
The camera returns to the White Balance setting screen.
5
Press the 4 button.
The [A Rec. Mode 1] menu is resumed.
6
Press the 3 button.
The camera is ready to take a picture.
When adapting three images captured in p mode, you can apply an
HDR Filter effect. Select the level of the effect.
1
Use the four-way controller (23) to select [p
Capture] in the [A Rec. Mode 2] menu, and press the
four-way controller (5).
A pull-down menu appears
2
Use the four-way controller (23) to select [Standard],
[Strong 1] or [Strong 2], and press the 4 button.
The setting is saved.
You can expand the dynamic range and prevent bright and dark areas
from occurring. [Highlight Correction] adjusts the bright areas when the
image is too bright and [Shadow Correction] adjusts the dark areas when
the image is too dark.
Four-way controller
(45)
Adjusts the tone of the colors between
blue (B) and amber (A).
d/i button Resets the adjustment value.
Selecting p Capture Mode
Standard For storing the composite picture as-is
Strong 1
For applying an HDR Filter effect to the composite picture before
storing
Strong 2
For applying an HDR Filter effect stronger than that with [Strong 1] to
the composite picture before storing
Compensating for Brightness (D-Range Setting)
To Next Page
Loading...
Need help?
General
