Pentax MX-1 User Manual

180
5
Settings
1 Use the four-way controller (23) to select [File Name]
in the [W Setting 2] menu, and press the four-way
controller (5).
A pull-down menu appears.
2 Use the four-way controller (23) to select the rule for
naming files.
Select [IMGP] or [USER].
3 Press the 4 button.
The setting is saved.
You can name the file of captured images.
You can enter up to four numbers and letters.
The 4-digit name is displayed before the 4-digit file number.
1 Select [USER] in Step 2 in “To Select
a Rule for Naming Files”, and press
the four-way controller (5).
The file naming screen appears.
“USER” has already been entered.
2 Use the four-way controller (2345) to select the
letter to enter, and press the 4 button.
The first letter is fixed and the cursor moves to the second letter.
3 Repeat Step 2 and enter the remaining letters.
4 Press the four-way controller (4)
while “A” is selected, or press (35)
while “_” is selected.
The frame moves to [Settings complete].
To Select a Rule for Naming Files
To Name the File Yourself
File Name
File Name
Cancel
Cancel
Enter
Enter
Settings complete
Settings complete
File Name
File Name
Cancel
Cancel
OK
OK
Settings complete
Settings complete

Pentax MX-1 Specifications

General

Aperture	f/1.8-2.5
ISO Range	100 - 12800
Image Stabilization	Sensor-shift Shake Reduction
Storage Media	SD/SDHC/SDXC memory card
Weight	391 g (including battery and memory card)
Effective Pixels	12.0 MP
Lens	28-112mm (4x Optical Zoom)
Shutter Speed	1/2000 to 30 sec
LCD Screen	3.0-inch tilting LCD, 920, 000 dots
Video Resolution	1920x1080 (Full HD)
Battery Type	Rechargeable D-LI106 lithium-ion battery