Pentax MX-1 - Creating a Collage Image

150
4
Editing and Printing Images
2 Use the four-way controller (2345) to select p
(HDR Filter) from the Playback Mode Palette.
3 Press the 4 button.
The preview image of the result of the filter effect appears.
4 Press the 4 button.
The save confirmation screen appears.
If the selected image is protected, the processed image is saved as a
new image and the confirmation does not appear.
5 Use the four-way controller (23) to select [Save as],
and press the 4 button.
The image processed with the filter is saved.
Make a collage image by placing captured images on a selected pattern.
1 Use the four-way controller (2345) to select
(Collage) from the Playback Mode Palette.
2 Press the 4 button.
The item selection screen appears.
3 Use the four-way controller (23) to choose [Recorded
Pixels].
4 Press the 4 button or the four-way controller (5).
A pull-down menu appears.
Creating a Collage Image
To Select the Number of Recorded Pixels
Create an image
Create an image
Recorded Pixels
Recorded Pixels
Layout
Layout
Backgnd.
Backgnd.
Select image(s)
Select image(s)