Pentax MX-1 User Manual

22
To Switch from Q Mode to A Mode
Press the Q button or the shutter release button.
A variety of information appears on the display depending on the status
of the camera.
The display shows information such as the shooting conditions in
shooting mode. The display changes each time you press the 4
button.
Standard display
All items displayed in still-picture capture mode are shown here for
explanatory purposes. The actual display may differ.
Displaying the data stored in the built-in memory
When an SD Memory Card is inserted in the camera, images and
movies on the SD Memory Card are displayed. If you want to display
images and movies in the built-in memory, turn the camera off and
remove the SD Memory Card.
Indications on the Display
The brightness and the tone of colors of the display can be adjusted.
(p.185)
Display in Shooting Mode
Make sure that the camera is turned off before inserting or removing
the SD Memory Card.
+1.7
EV
+1.7
EV
1/
2000
1/
2000
F2.8
F2.8
1600
1600
37
37
4
4
No Info.Standard display

Pentax MX-1 Specifications

General

Aperture	f/1.8-2.5
ISO Range	100 - 12800
Image Stabilization	Sensor-shift Shake Reduction
Storage Media	SD/SDHC/SDXC memory card
Weight	391 g (including battery and memory card)
Effective Pixels	12.0 MP
Lens	28-112mm (4x Optical Zoom)
Shutter Speed	1/2000 to 30 sec
LCD Screen	3.0-inch tilting LCD, 920, 000 dots
Video Resolution	1920x1080 (Full HD)
Battery Type	Rechargeable D-LI106 lithium-ion battery