153
4
Editing and Printing Images
20
Use the four-way controller (23)
to choose [Create an image].
21
Press the 4 button.
A confirmation dialog for saving the image appears.
22
Use the four-way controller (2) to select [Save].
23
Press the 4 button.
The edited image is saved.
You can correct images where the flash has caused the subject to
appear with red eyes.
1
In playback mode, use the four-way controller (45) to
choose the image you want to correct.
2
Use the four-way controller (2345) to select Z (Red-
eye Edit) from the Playback Mode Palette.
3
Press the 4 button.
The save confirmation screen appears.
If the selected image is protected, the processed image is saved as a
new image and the confirmation dialog does not appear.
To Save the Edited Image
The quality level of the image is fixed at “Fine”.
Compensating for a Red-eye Effect
The Red-eye Edit function can only be used with still pictures taken with
this camera. The red-eye edit function cannot be used on images taken
at F (Digital Panorama) mode, movies, images taken with other
cameras and images where red eyes cannot be detected on the camera.
OK
Create an image
Recorded Pixels
Layout
Backgnd.
Select image(s)
To Next Page
Loading...
Need help?
General
