114
2
Taking Pictures
This mode enables you to record movies. Sound is recorded at the same
time.
1
Set the mode dial to C or choose a movie mode using
the Movie Mode Palette (p.113), and press the OK
button.
Cautions for C (Movie), c (Time-Lapse Movie) and d (High Speed
Movie) in common
• The flash cannot be used.
• The AE metering method is fixed to L (Multi-segment) and the
sensitivity is fixed to ISO AUTO.
• Only Standard, Self-timer or Remote Control can be selected for the
drive mode.
• Optical Shake Reduction is not performed.
• Select the focus mode before recording starts. The focus mode cannot
be changed during recording.
• The focus can be adjusted manually before recording starts if the focus
mode is set to \ (Manual Focus). The focus cannot be adjusted
during recording.
• When the mode dial is set to C, the Face Detection function is
automatically set to [On]. If you want to set it to [Smile] or [Off], change
the setting in the [A Rec. Mode 2] menu before movie recording starts
(p.107).
• When the Face Detection function is set to [Smile] and the focus mode
is set to = (Standard) or q (Macro), movie recording starts
automatically when the camera detects the subject’s smile. However,
depending on the condition of the detected faces, movie recording
may not start automatically, because the Smile Capture function may
not work. If this happens, press the shutter release button to start
recording a movie.
•In d (High Speed Movie) mode, [Movie SR] (Movie Shake Reduction)
is fixed to P (Off).
Recording a Movie
To Next Page
Loading...
Need help?
General
