188
5
Settings
Sets the display method in capture mode.
1
Select [LCD View Options] in the [A Rec. Mode 3]
menu, and press the four-way controller (5).
The [LCD View Options] screen appears.
2
Press the four-way controller (5),
use the four-way controller (23)
to select a Grid Display type, and
press the 4 button.
Select X (Off), v (3×3 Grid), w (8×6
Grid) or g (Scale Grid).
3
Use the four-way controller (23) to select [Histogram],
[Highlight Alert], or [Electronic Level], and use the four-
way controller (45) to switch between O and P.
4
Press the 3 button twice.
The screen that was displayed before selecting the menu appears
again.
Set the initial menu tab shown on the display when the 3 button is
pressed.
Setting the Display in Capture Mode (LCD View
Options)
Histogram Shows the brightness distribution of an image (p.27).
Highlight Alert Bright (overexposed) portions blink red (p.29).
Electronic Level Displays the electronic level indication (p.31).
The [Grid Display] and [Histogram] settings can also be changed using
the control panel.
Setting the Initial Menu Tab Displayed
OK
MENU
LCD View Options
Grid Display
Histogram
Highlight Alert
Electronic Level
Cancel
OK
To Next Page
Loading...
Need help?
General
