183
5
Settings
3
Use the four-way controller (45) to switch between O
and P.
O Embeds the copyright information when capturing a image.
P Does not embed the copyright information (default setting).
4
Press the 3 button twice.
The screen that was displayed before selecting the menu appears
again.
When you take pictures and/or play them back with the camera
connected to AV equipment, select an appropriate video output format
(NTSC or PAL).
1
Use the four-way controller (23) to select [Video Out]
in the [W Setting 2] menu, and press the four-way
controller (5).
A pull-down menu appears.
2
Use the four-way controller (23) to select a video
output format.
Choose [NTSC] or [PAL] to match the format of the connected AV
equipment.
3
Press the 4 button.
The setting is saved.
Changing the Video Output Format
Depending on the country or region, images and sounds may fail to be
played back if the video output format is set differently from the one in
use there. If this happens, change the video output format setting.
Connecting the Camera to AV Equipment 1p.138
Video output format of each city 1p.223
To Next Page
Loading...
