106
2
Taking Pictures
2
Use the four-way controller (23) to select [Auto], [On],
or [Off], and press the 4 button.
You can reduce lens distortions occurring due to lens properties.
1
Use the four-way controller (23) to select [Distortion
Corr.] in the [A Rec. Mode 2] menu.
2
Use the four-way controller (45) to switch between O
(On) and P (Off).
By using this function, you can correct camera shake during shooting.
You can select the optical correction only (Sensor Shift) or both the
optical and electronic correction (Dual). The default setting is [Sensor
Shift].
• When you switch the camera to a (Manual Exposure) or C (Movie)
mode with [Auto] selected, the setting is automatically changed to
[Off].
• The setting is fixed to [Auto] in b (Auto Picture) mode or is fixed to
[Off] in S (Fireworks) mode.
• The [ND Filter] setting can also be changed using the control panel.
Correcting Lens Distortion (Distortion
Correction)
The effects of the Distortion Correction function may be barely
noticeable in some cases depending on the shooting conditions and
other factors.
Setting the Shake Reduction
Sensor Shift For correcting camera shake optically only
Dual For correcting camera shake both optically and electronically
Off Neither optical nor electronic camera shake correction is performed.
To Next Page
Loading...
Need help?
General
