Pentax MX-1 - Connecting the Camera and the Computer

196
6
Connecting to a Computer
Unless otherwise specified, select MSC when connecting this camera to
a computer.
Connect your camera to the computer using the provided USB cable.
1 Turn the computer on.
2 Turn your camera off.
3 Connect your camera to the computer using the USB
cable.
Face the } mark on the USB cable towards the 4 mark on the
camera, and connect the cable to the PC/AV terminal.
4 Turn your camera on.
The camera is recognized by the computer.
Connecting the Camera and the Computer
If the battery runs out of power while images are being transferred to the
computer, the image data may be lost or damaged. When connecting
your camera to the computer, use of the AC adapter kit K-AC130
(optional) is recommended (p.42).
• The power lamp blinks while the camera is connected to a computer.
• For information on system requirements, refer to p.194.
PC/AV terminal
USB cable