Pentax MX-1 User Manual

191
5
Settings
3 Use the four-way controller (23)
to select [Pixel Mapping].
4 Press the 4 button.
Defective pixels are mapped and corrected.
You can start a function by pressing a button other than the power button
when the camera is off.
1 Use the four-way controller (23) to select [Startup
Shortcut] in the [W Setting 4] menu, and press the four-
way controller (5).
The [Startup Shortcut] screen appears.
2 Use the four-way controller (23)
to select an item.
When the battery level is low, [Not enough battery power remaining to
activate Pixel Mapping] appears on the display. Use the AC adapter kit
K-AC130 (optional) or replace the battery with one having sufficient
power.
Setting the Startup Shortcut
Playback Mode
When [Playback Mode] is O (On), you can turn on the camera
by holding the Q button pressed.
Clock Display
When [Clock Display] is O (On), you can display the clock on
the display by holding the 4 button pressed.
Pixel Mapping
Pixel Mapping
Pixel Mapping
Pixel Mapping
Cancel
Cancel
Checks the image sensor
and corrects defective
pixels
Checks the image sensor
and corrects defective
pixels
OK
OK
Startup Shortcut
Startup Shortcut
Playback Mode
Playback Mode
Clock Display
Clock Display

Pentax MX-1 Specifications

General

Aperture	f/1.8-2.5
ISO Range	100 - 12800
Image Stabilization	Sensor-shift Shake Reduction
Storage Media	SD/SDHC/SDXC memory card
Weight	391 g (including battery and memory card)
Effective Pixels	12.0 MP
Lens	28-112mm (4x Optical Zoom)
Shutter Speed	1/2000 to 30 sec
LCD Screen	3.0-inch tilting LCD, 920, 000 dots
Video Resolution	1920x1080 (Full HD)
Battery Type	Rechargeable D-LI106 lithium-ion battery