Pentax MX-1 User Manual

32
How to Change Function Settings
Function settings of the camera can be changed using the direct keys,
menus or control panel.
This section explains the basic ways to change function settings.
In capture mode, you can set Drive Mode, Sensitivity, Flash Mode and
Focus Mode by pressing the four-way controller (2345). (p.63)
Below, how to set Focus Mode is explained as an example.
1 Press the four-way controller (5)
in capture mode.
The Focus Mode setting screen appears.
2 Use the four-way controller (45)
to select a focus mode.
3 Press the 4 button.
The camera is ready to take a picture.
Using the Direct Keys
Cancel
Cancel
Standard
Standard
OK
OK

Pentax MX-1 Specifications

General

Aperture	f/1.8-2.5
ISO Range	100 - 12800
Image Stabilization	Sensor-shift Shake Reduction
Storage Media	SD/SDHC/SDXC memory card
Weight	391 g (including battery and memory card)
Effective Pixels	12.0 MP
Lens	28-112mm (4x Optical Zoom)
Shutter Speed	1/2000 to 30 sec
LCD Screen	3.0-inch tilting LCD, 920, 000 dots
Video Resolution	1920x1080 (Full HD)
Battery Type	Rechargeable D-LI106 lithium-ion battery