Pentax MX-1 User Manual

39
1
Getting Started
Use the rechargeable lithium-ion battery D-LI106 that is provided with
the camera. Charge the battery before using it in the camera for the first
time.
1 Open the battery/card cover.
Slide the battery/card cover lock lever in the direction indicated by the
arrow 1, and the cover opens in the direction of the arrow 2.
• Do not use the supplied battery charger (D-BC106) to charge batteries
other than the rechargeable lithium-ion battery D-LI106, as the battery
charger may overheat or be damaged.
• The battery has reached the end of its service life when it starts to run
down soon after being charged. Replace it with a new battery.
• If the battery is inserted correctly but the charging indicator fails to
light, the battery may be faulty. Replace it with a new battery.
The time required to fully charge the battery is about 140 minutes (max.).
(The charging time may vary depending on the ambient temperature and
charging conditions.) The appropriate ambient temperature for charging
the battery is 0°C to 40°C (32°F to 104°F).
Installing the Battery
Battery/card cover
Battery lock lever
Battery
Battery/card cover lock lever

Pentax MX-1 Specifications

General

Aperture	f/1.8-2.5
ISO Range	100 - 12800
Image Stabilization	Sensor-shift Shake Reduction
Storage Media	SD/SDHC/SDXC memory card
Weight	391 g (including battery and memory card)
Effective Pixels	12.0 MP
Lens	28-112mm (4x Optical Zoom)
Shutter Speed	1/2000 to 30 sec
LCD Screen	3.0-inch tilting LCD, 920, 000 dots
Video Resolution	1920x1080 (Full HD)
Battery Type	Rechargeable D-LI106 lithium-ion battery