Pentax MX-1 User Manual

34
4 Press the four-way controller (5).
Available settings are displayed in the pull-
down menu or submenu.
5 Use the four-way controller (23)
to select a setting.
Press the 3 button to cancel the pull-
down menu, or return to the previous
screen.
6 Press the 4 button.
The setting is saved.
Press the 3 button if a submenu is
displayed.
Next, set other items.
7 Press the 3 button.
The screen that was displayed before
selecting the menu appears again.
Even after you press the 3 button and close the menu screen, your
settings will not be saved if the camera is turned off improperly (such as
by removing the battery while the camera is on).
1 2 3
MENU
Exit
Exit
Sensor Shift
Sensor Shift
On
On
D-Range Setting
D-Range Setting
Distortion Corr.
Distortion Corr.
Shake Reduction
Shake Reduction
Face Detection
Face Detection
Blink Detection
Blink Detection
HDR Capture
HDR Capture
Standard
Standard
MENU OK
1 2 3
Cancel
Cancel
OK
OK
Sensor Shift
Sensor Shift
Dual
Dual
Off
Off
D-Range Setting
D-Range Setting
Distortion Corr.
Distortion Corr.
Shake Reduction
Shake Reduction
Face Detection
Face Detection
Blink Detection
Blink Detection
HDR Capture
HDR Capture
Standard
Standard

Pentax MX-1 Specifications

General

Aperture	f/1.8-2.5
ISO Range	100 - 12800
Image Stabilization	Sensor-shift Shake Reduction
Storage Media	SD/SDHC/SDXC memory card
Weight	391 g (including battery and memory card)
Effective Pixels	12.0 MP
Lens	28-112mm (4x Optical Zoom)
Shutter Speed	1/2000 to 30 sec
LCD Screen	3.0-inch tilting LCD, 920, 000 dots
Video Resolution	1920x1080 (Full HD)
Battery Type	Rechargeable D-LI106 lithium-ion battery