167
4
Editing and Printing Images
3
Use the four-way controller (23)
to select [Single Image].
4
Press the 4 button.
The message [Applies DPOF settings to this image] appears.
5
Use the four-way controller (45) to select an image.
If DPOF settings have already been made for the selected image, the
previous number of copies and date setting O (On) or P (Off) is
displayed.
6
Use the four-way controller (23)
to choose the number of copies.
7
Press the d/i button to switch
between O and P for [Date].
O Imprints the date.
P Does not imprint the date.
To continue DPOF settings to other
image(s), repeat Steps 5 to 7.
8
Press the 4 button.
The settings are saved and the screen shown in Step 3 is resumed.
Depending on the printer or printing equipment at the photo processing
lab, the date may not be imprinted on the pictures even if O is selected
for [Date] in DPOF setting.
To cancel DPOF settings, set the number of copies to [00] in Step 6 and
press the 4 button.
OK
Single Image
All Images
Cancel
OK
Cancel
Date
Copies
Date
Applies DPOF settings
to this image
Applies DPOF settings
to this image
100-0017
OK
Cancel
Date
Copies
Date
Applies DPOF settings
to this image
Applies DPOF settings
to this image
100-0017
To Next Page
Loading...
Need help?
General
