Pentax MX-1 User Manual

136
3
Playing Back and Deleting Images
To protect another image, use the four-way controller (45) to select
another image.
6 Use the four-way controller (23)
to select [Protect].
7 Press the 4 button.
The selected image is protected and the screen shown in Step 4
reappears.
To protect other images, repeat Steps 4 to 7. Select [Cancel] to exit the
Protect setting.
1 Select [All Images] in Step 4 on
p.135.
2 Press the 4 button.
3 Use the four-way controller (23)
to select [Protect].
• To cancel the protection of the image, select [Unprotect] in Step 6.
• Y appears on the protected images during playback.
• The maximum number of images you can protect in succession with
[Single Image] is 99.
To Protect All Images
100-0017
100-0017
OK
OK
Protect
Protect
Protects this image
Protects this image
Unprotect
Unprotect
Cancel
Cancel
OK
OK
Single Image
Single Image
All Images
All Images
Cancel
Cancel
OK
OK
Protect
Protect
Protects all images
Protects all images
Unprotect
Unprotect
Cancel
Cancel

Pentax MX-1 Specifications

General

Aperture	f/1.8-2.5
ISO Range	100 - 12800
Image Stabilization	Sensor-shift Shake Reduction
Storage Media	SD/SDHC/SDXC memory card
Weight	391 g (including battery and memory card)
Effective Pixels	12.0 MP
Lens	28-112mm (4x Optical Zoom)
Shutter Speed	1/2000 to 30 sec
LCD Screen	3.0-inch tilting LCD, 920, 000 dots
Video Resolution	1920x1080 (Full HD)
Battery Type	Rechargeable D-LI106 lithium-ion battery