Pentax MX-1 - Page 158

156
4
Editing and Printing Images
12 Use the four-way controller (23) to select [Save as],
and press the 4 button.
The edited image is saved.
1 Press the d/i button.
The frame position adjustment screen
appears.
2 Press the d/i button.
The image position adjustment screen
appears.
3 Press the 4 button.
The screen returns to the previous screen.
1 Use the four-way controller
(2345) to select a character,
and press the 4 button.
The selected character is input.
Up to 52 characters can be input.
To Adjust the Position of the Frame and an Image
Four-way controller
(2345)
Press to adjust the
position of the frame.
Zoom lever to the
right (5)
Press to make the
frame larger.
Zoom lever to the
left (6)
Press to make the
frame smaller.
Four-way controller
(2345)
Press to adjust the
position of the image.
Zoom lever to the
right (5)
Press to make the
image larger.
Zoom lever to the
left (6)
Press to make the
image smaller.
To Set Up Text Stamp
Cancel
Cancel
OK
OK
Cancel
Cancel
OK
OK
Cancel
Cancel
Enter
Enter
Text Stamp
Text Stamp
Delete One Character
Delete One Character
Finish
Finish