160
4
Editing and Printing Images
You can develop multiple RAW images with the same settings.
1
Select [Develop multiple images] in Step 3 on p.158,
and press the 4 button.
The multi-image display screen appears.
Refer to p.125 for details on operations in the multi-image display
screen.
2
Use the four-way controller (2345) to select the
RAW images to be developed, and press the 4
button.
3
Press the A button.
The development confirmation screen appears.
4
Use the four-way controller (23)
to select [Develop images as shot]
or [Develop images with modified
settings], and press the 4
button.
To change parameters, select [Develop
images with modified settings].
5
Use the four-way controller
(2345) to set [Aspect Ratio],
[JPEG Recorded Pixels] and
[JPEG Quality].
When [Develop images with modified
settings] is selected in Step 4, refer to p.159
to change other parameters.
6
Press the 4 button.
The save confirmation screen appears.
7
Use the four-way controller (23) to select [Save as],
and press the 4 button.
The selected RAW images are developed and saved as new images.
To Develop Multiple RAW Images
OK
Develop images as shot
Develop images with
modified settings
Develop images with
modified settings
OK
Cancel
Aspect Ratio
JPEG Recorded Pixels
JPEG Quality
To Next Page
Loading...
Need help?
General
