Pentax MX-1 User Manual

163
4
Editing and Printing Images
4 Select [Adding title picture] on the movie editing
selection screen.
5 Press the 4 button.
The screen for selecting a title picture appears.
6 Use the four-way controller (45) to choose the image
for the title picture.
Only images available for the title picture are displayed.
7 Press the 4 button.
The screen for confirming the position of the title picture appears.
8 Use the four-way controller (23)
to select the position.
e Adds the title picture to the beginning
of the movie.
f Adds the title picture to the end of the
movie.
9 Press the 4 button.
The selected picture is saved as the title picture.
To Add a Title Picture to a Movie
• Protected movies cannot be added a title picture.
• If a movie is more than 26 minutes long after adding title pictures, you
cannot add any more title pictures to it.
OK
OK
Specify the position of
title picture to add
Specify the position of
title picture to add
Cancel
Cancel

Pentax MX-1 Specifications

General

Aperture	f/1.8-2.5
ISO Range	100 - 12800
Image Stabilization	Sensor-shift Shake Reduction
Storage Media	SD/SDHC/SDXC memory card
Weight	391 g (including battery and memory card)
Effective Pixels	12.0 MP
Lens	28-112mm (4x Optical Zoom)
Shutter Speed	1/2000 to 30 sec
LCD Screen	3.0-inch tilting LCD, 920, 000 dots
Video Resolution	1920x1080 (Full HD)
Battery Type	Rechargeable D-LI106 lithium-ion battery