213
7
Appendix
Data being recorded
Displayed when you switch to playback mode while an
image is still being recorded, or when the protect setting or
DPOF setting is being saved. It disappears after the image
is recorded or the setting is saved.
Data being processed
Displayed when the camera takes more than five seconds
to display an image due to image processing, or when the
SD Memory Card or the built-in memory is being formatted.
Built-in memory full Displayed if the built-in memory is full when saving a file.
No image can be
processed
Displayed when there are no images.
This image cannot be
processed
Displayed for files that cannot be processed.
No card in the camera Displayed when no SD Memory Card is inserted.
Available memory on
card is insufficient to
copy the images
Displayed when there is insufficient memory on the SD
Memory Card to perform copying.
Available built-in
memory is insufficient to
copy the images
Displayed when there is insufficient built-in memory to
perform copying.
Cannot process
correctly
Displayed when Red-eye Edit processing fails.
Please pop-up the flash Slide the b lever to enable the use of the flash.
Not enough battery
power remaining to
activate Pixel Mapping
Displayed during pixel mapping if the battery level is
insufficient. Install a new battery or use the optional AC
adapter kit K-AC130 (p.42).
This card isn’t
compatible with this
camera
Displayed when the version of the Eye-Fi card is outdated
and the camera is not compatible with it (p.201).
The version of this Eye-
Fi card is outdated
Message
Description
To Next Page
Loading...
Need help?
General
