Pentax MX-1 - Page 47

45
1
Getting Started
1 Make sure that the camera is turned off and open the
battery/card cover.
1 Slide the battery/card cover lock lever in the direction of the arrow
and 2 open the battery/card cover.
2 Insert the SD Memory Card into the SD Memory Card
socket so that the label is facing the display side of the
camera.
Push the card in until it clicks. Data may not be recorded correctly if the
card is not inserted all the way.
To remove the SD Memory Card, push it in once and then pull it out.
3 Close the battery/card cover.
Close the battery/card cover, and slide the battery/card cover lock
lever in the opposite direction of 1 to lock.
SD Memory Card
Battery/card cover lock lever
Battery/card cover
SD Memory Card socket