Pentax MX-1 User Manual

52
1
Getting Started
If you press the 4 button in Step 10, the camera clock is reset to 0
seconds. To set the exact time, press the 4 button when the time
signal (on the TV, radio, etc.) reaches 0 seconds.
When the [Initial Setting] or [Date Adjustment] screen is displayed, you
can cancel the settings made up to that point and switch to capture mode
by pressing the 3 button. In this case, the [Initial Setting] screen will
appear again the next time you turn the camera on.
The language, date, time, Hometown city, and DST setting can be changed.
Refer to the pages below for instructions.
• To change the language, follow the steps in “Changing the Display Language”
(1p.177).
• To change the date and time, follow the steps in “Changing the Date and
Time” (1p.173).
• To change the Hometown city or DST setting, follow the steps in “Setting the
World Time” (1p.174).

Pentax MX-1 Specifications

General

Aperture	f/1.8-2.5
ISO Range	100 - 12800
Image Stabilization	Sensor-shift Shake Reduction
Storage Media	SD/SDHC/SDXC memory card
Weight	391 g (including battery and memory card)
Effective Pixels	12.0 MP
Lens	28-112mm (4x Optical Zoom)
Shutter Speed	1/2000 to 30 sec
LCD Screen	3.0-inch tilting LCD, 920, 000 dots
Video Resolution	1920x1080 (Full HD)
Battery Type	Rechargeable D-LI106 lithium-ion battery