62
2
Taking Pictures
The Digital Zoom is set to O (On) in the default setting. To take pictures
using only the optical zoom and Intelligent Zoom range, set the Digital
Zoom to P (Off).
1
Press the 3 button in still-picture capture mode.
The [A Rec. Mode 1] menu appears.
2
Use the four-way controller (45) to select the [A Rec.
Mode 3] menu, then press the four-way controller (23)
to select [Digital Zoom].
3
Use the four-way controller (45)
to select O or P.
O Uses Digital Zoom.
P Uses only optical zoom and Intelligent
Zoom.
The setting is saved.
4
Press the 3 button.
The camera returns to capture status.
f/O/N/P Approx. 6.2x Approx. 7.8x
h/Q/R/S Approx. 7.8x Not available
• It is recommended to use a tripod or other support to prevent camera
shake when taking pictures at high zoom.
• When the focus mode is set to I (1cm Macro), the zoom position is
fixed.
• Pictures taken in the Digital Zoom range appear grainier than pictures
taken in the optical zoom range.
• Intelligent Zoom is not available when the number of recorded pixels
is set to E/I/H/J (4.0× optical zoom and Digital Zoom are
available).
• The image enlarged using Intelligent Zoom may appear rough on the
display. This does not affect the quality of the recorded image.
To Set the Digital Zoom
Saving the Digital Zoom function setting 1p.121
Recorded Pixels Intelligent Zoom Digital Zoom
123
MENU
Exit
Instant Review
1 sec.
Off
Memory
LCD View Options
Date Imprint
Digital Zoom
To Next Page
Loading...
Need help?
General
