93
2
Taking Pictures
4
Use the four-way controller (45) to select O (On) or P
(Off).
The setting is saved.
When you choose [Select] for [Focusing Area], select a point from the 25
focusing areas.
1
Press the four-way controller (5) in
capture mode.
The screen for selecting Focusing Area is
displayed.
2
Use the four-way controller (2345) to select a
Focusing Area.
3
Press the 4 button.
The setting is saved and the shooting display is resumed.
If the 3 button is pressed in place of the 4 button, the Focus
Mode screen is displayed.
• Looking at the light directly does not pose a safety but you may feel
dazzled. Do not look directly into the emitter from a very short distance.
• The camera does not emit the Focus Assist light under the following
conditions:
- when the capture mode is set to c (Time-Lapse Movie), C (Movie)
or d (High Speed Movie) mode
- when s (Infinity), 3 (Pan Focus) or \ (Manual Focus) is
selected as the focus mode
• The default setting in e (Pet) mode and Y (Candid Capture) mode
is P (Off).
To Select the Focusing Point (Select)
• The Focusing Area selection is allowed only when the focus mode is
= (Standard), q (Macro) or I (1cm Macro)
• The Focusing Area setting is common to = (Standard), q (Macro)
and I (1cm Macro).
OK
To Next Page
Loading...
Need help?
General
