Pentax OPTIO VS20 User Manual

115
3
Taking Pictures
1 Use the four-way controller (45) to select a blank
column.
2 Press the 9 (Green) button.
The screen for registering a face appears. Point the camera at the face
to be registered.
When a face is detected around the yellow frame, the face is taken
automatically, and the screen to enter the name appears.
3 Enter the person’s name for the face that has been
registered.
Enter the name following Step 4 in “To Register the First Face” (p.114)
then press the OK button. The face list screen appears.
4 Set the priority.
Use the four-way controller (45) to select
a face to set the priority and turn the zoom
lever to select the priority from [1], [2], and
[3].
([3] appears only for registering a third
face.)
The registered faces appear with the
highest priority on the left.
The priority can be set later using the same
procedure.
5 Press the 3 button.
The camera returns to the [A Rec. Mode] menu.
1 Select [Face Recall] on the [A Rec. Mode] menu to
display the face list screen.
2 Use the four-way controller (45) to select a face to be
changed then press the 4 button.
The screen to enter the name appears.
To Change a Registered Name
E d i t
Edit
P r i o r i t i z e
Prioritize
OK
MENU
MARY ANNE
1
13
2
2
D e l e t e
Delete
E x i t
Exit
Face Recall
OK
MENU
3
MARYANNE
2
2
1
1
Face Recall
E d i t
Edit
P r i o r i t i z e
Prioritize
D e l e t e
Delete
E x i t
Exit

Pentax OPTIO VS20 Specifications

General

Brand	Pentax
Model	OPTIO VS20
Category	Digital Camera
Language	English