38
1
Getting Started
1
Open the battery/card cover.
Slide the battery/card cover lock lever in the direction indicated by the
arrow 1 and flip the cover open 2.
2
Insert the SD Memory Card into the SD Memory Card
socket so that the label is facing toward the lens of the
camera.
Push the card in until it clicks. Data may not be recorded correctly if the
card is not inserted all the way.
3
Close the battery/card cover.
After closing the battery/card cover, slide the cover lock lever in the
opposite direction indicated by 1. When you hear a click, the cover is
securely closed.
1
Open the battery/card cover.
2
Push the card into the SD Memory Card socket to eject
it.
Pull the card out.
To Remove the SD Memory Card
SD Memory Card socket
Battery/card cover
SD Memory Card
Battery/card cover
lock lever
To Next Page
Loading...
Need help?
General
