57
2
Common Operations
7
Press the 4 button or the four-way controller (4).
The setting is saved and then the camera is ready for setting the other
functions. To exit the settings, press the 3 button.
7
Press the shutter release button halfway.
The setting is saved and the camera returns to capture status.
When the shutter release button is pressed fully, the picture is taken.
7
Press the Q button.
When the [A Rec.Mode] menu is displayed from A mode, the setting
is saved and the camera returns to playback status.
7
Press the 3 button.
The changes are canceled and the screen returns to Step 3.
To use another operation, refer to the following alternate Step 7 options.
To Save the Setting and Start Taking Pictures
When the [W Setting] menu is displayed from Q mode, you can switch
to A mode by pressing the Q button.
To Save the Setting and Start Playback of Images
To Cancel the Changes and Continue with Menu Operations
The 3 button function differs depending on the screen. Refer to the
guide indications.
Exit : Exits the menu and returns to the original screen.
: Returns to the previous screen with the current
setting.
Cancel : Cancels the current selection, exits the menu and
returns to the previous screen.
MENU
MENU
MENU
To Next Page
Loading...
