Pentax OPTIO VS20 - Page 98

96
3
Taking Pictures
3 Press the four-way controller (3).
4 Use the four-way controller (45)
to select the amount of exposure
change.
Select from.[ ±0.3 EV], [±0.7 EV], and
[±1.0EV]
5 Press the OK button.
The setting is saved and the camera returns to capture status in Auto
Bracketing mode.
6 Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses
on the subject at the correct distance.
7 Press the shutter release button fully.
Three pictures with different exposure are taken
•In b (Auto Picture), 9 (Green), S (Fireworks), F (Digital
Panorama), or N (Frame Composition), you cannot select Auto
Bracketing.
• In Auto Bracketing mode, Blink Detection is fixed at Off.
±
0.7EV
0.7EV
±0.7EV
F5.6
OK
OK
OK
MENU
Cancel
C a nc e l
Cancel
MENU
Cancel
C a nc e l
Cancel
MENU
Cancel
C a nc e l
Cancel
MENU
Cancel
C a nc e l
Cancel
MENU
Cancel
C a nc e l
Cancel
Drive Mode
D r iv e M o d e
Auto Bracketing
A u t o B r a c k e t i n g
Drive Mode
Auto Bracketing